5
Pair
1. For the first time, hold the L&R headset MFB button for 4 seconds to turn on. The red
and blue alternate flashing state and then release. The master automatically searches for
the pairing of the slave earbuds. When the L-side master indicator flashes alternately red
and blue, the R-side slave is alternated by red and blue lights. Flashing blue light single
flash means that the TWS group is successful. Open the mobile phone or mobile device
Bluetooth switch to search for the pair name TWS01, click the connection in the search
list to complete the pairing.
2. After the first pairing, the headset will automatically remember the device. When the
headset is turned on again, it will automatically find the device memory for independent
connection.
Turn off the memorized device Bluetooth switch when connecting with a new device.
(Connection method: The new device directly searches for the headset with the Bluetooth
name "A&S Batman / A&S Wonder Woman" in the Bluetooth list and clicks to match)
Reset
If the headset cannot be properly paired or cannot be connected normally, hold the
pairing mode for 6 seconds when the two headphones a returned off (the red and blue
lights flash alternately), and press the L&R for three times to restore the factory settings.
There will be a "beep" sound, then turn off the power and turn it on again to complete the
left and right ear automatic group pair. After the group is successfully turned on. The
mobile phone Bluetooth can click the pairing name.
A&S TWS01
