6.1
General notes
6.1.1
Only trained persons are allowed to operate the
hoist.
6.1.2
Do not operate the
hoist
if the floor is cracked or any components broken.
6.1.3
Do not operate if there is any person or obstacles above or under pla�orms.
6.1.4
This equipment is designed for car eleva�ng only, drivers are not allowed to ride the
hoist
or stay in the car.
6.1.5
Keep hands and feet away from any moving parts.
6.1.6
This parking
hoist
is only designed to li� the en�re body of vehicle with maximum weight not more than the
rated capacity.
6.2
Parking
6.2.1
Drive car onto the center of pla�orms, avoiding any collision with posts or any other
hoist
structures.
6.2.2
Pull the brake on a�er vehicle parked on the targeted posi�on to avoid any accidental movement during
li�ing up or lowering down.
6.2.3
Over loading is prohibited at any circumstances.
6.2.4
Open the car door carefully to avoid any collision.
6.2.5
Make sure the car sizes and weight are in allowance range.
6.3
Operation
6.3.1
Before first opera�on, firstly turn on main switch, secondly turn on the power switch on switching cabinet,
and thirdly make sure the emergency stop bu�on is open.
6.3.2
The power indicator light is off un�l both main switch and power switch on switching cabinet is turned on.
6.3.3
Turn the key by an�clockwise to make the pla�orm go up, and turn the key by clockwise to make the
pla�orm down.
6.3.4
Pay all your a�en�on on the movement of pla�orm during system working.
6.3.5
Release your finger from the Key or push Emergency Stop bu�on immediately to stop li� working in case of
any abnormali�es.
6.3.6
Once the problem related to 6.3.5 solved completely, insert the key for emergency stop bu�on and turn to
reset.
6.3.7
The buzzer should keep making sounds when pla�orms move up or down.
6.3.8
If not to be used anymore, turn off the power supply, empty the oil tank and dispose the fluid properly
according to local regula�ons.
６
Operation
28
AL
2525 &
AL
2625
USER MANUAL
