!
Chapter 3 – Packing, transport and storage
Only skilled personnel who are familiar with the lift and this manual shall be allowed to carry out
packing, lifting, handling, transport and unpacking operations.
3.1 Transport and package removal
ATTENTION: moving and positioning operations can be very dangerous if not performed with
the utmost caution. Send bystanders away; clean, clear and delimit the installation site;
check the integrity and suitability of the available means; do not touch the suspended loads
and stay at a safe distance from them; move the suspended loads at not more than 20cm
height from ground; carefully follow the instructions given below; in case of doubt do not
persist.
For transport and volume reasons, the lift is supplied partially disassembled. The different parts are joint
together to allow a safe transport and handling. Transport of the lift must be performed by suitable means.
Avoid any damage during handling.
3.2 Lifting and handling
When loading/unloading or transporting the equipment to the site, be sure to use suitable loading (e.g.
cranes, trucks) and hoisting means. Be sure also to hoist and transport the components securely so that
they cannot drop, taking into consideration the package’s size, weight and centre of gravity and it’s
fragile parts.
Hoist and handle only one package at a time
3.3 Storage and stacking of packages
Packages must be stored in a covered place, out of direct sunlight and in low humidity, at a temperature
between -10
℃
and +40
℃
.
Stacking is not recommended: the package’s narrow base, as well as its considerable weight and size
make it difficult and hazardous.
3.4 Delivery and check of packages
When the lift is delivered, check for possible damages due to transport and storage, verify that what is
specified in the manufacturer’s confirmation of order is included. In case of damage in transit, the
customer must immediately inform the carrier of the problem.
Packages must be opened paying attention not to cause damage to people (Keep a safe distance when
opening straps) and parts of the lift (be careful the objects do not drop from the package when
opening).
7
Summary of Contents for AutoLift AL-900DD
Page 9: ...4 2 Parts list 9 ...
Page 10: ...10 ...
Page 11: ...4 3 Hydraulic unit 11 ...
