Specifications may change at any time without notice.
www.aarcantennas.com
Installation Instructions
Refer to the
Parts Table
below to check the all mounting kits are included
serious physical damage on the parts to avoid any installation
Notice:
All the work on installation, maintenance, or removal
qualified with experienced personnel.
once a year to ensure the orientations and connections are work as normal.
Caution:
1.
Do not install near the Power
2.
Do not install it in the wet-day, windy day, either lightning or thunder, do not use a metal
ladder at the same time.
3.
It strongly recommends when working on installation that wearing a pair of shoes
soles and heels, protective clothing with a long
Mounting Hardware
©Copyright AARC TECHNOLOGIES
Installation Instructions
below to check the all mounting kits are included
serious physical damage on the parts to avoid any installation failed.
NO.
1
Antenna pivot arm
2
Bracket
3
Bracket
4
Mount clamp
5
Calibration Tablets
6
M12×1
7
M12
8
φ
12
9
φ
12 Sp
10
M1
11
M10 Hex Nut
12
φ
10
13
φ
10 Sp
14
M12×1
15
M
16
M
17
Φ
8
18
Φ
8 Sp
installation, maintenance, or removal to the antenna system is
experienced personnel. It recommends that keep a check on the Antenna Systems
once a year to ensure the orientations and connections are work as normal.
ower Lines or Guy Wires to prevent getting an electric shock.
day, windy day, either lightning or thunder, do not use a metal
when working on installation that wearing a pair of shoes
soles and heels, protective clothing with a long-sleeve and rubber gloves.
Mounting Hardware
MKT20-V100
12AUG2015
TECHNOLOGIES CO., LTD., All Rights Reserved.
below to check the all mounting kits are included; check if there is a
Name
Qty
Antenna pivot arm
2
Bracket 1
1
Bracket 2
1
Mount clamp
4
alibration Tablets
1
M12×130 Bolt
4
M12 Hex Nut
20
2 Flat Washer
16
Spring Washer
16
M10×25 Bolt
4
M10 Hex Nut
4
0 Flat Washer
4
Spring Washer
4
M12×180 Bolt
4
M8×35 Bolt
2
M8 Hex Nut
4
Flat Washer
2
Spring Washer
2
system is required by
It recommends that keep a check on the Antenna Systems
or Guy Wires to prevent getting an electric shock.
day, windy day, either lightning or thunder, do not use a metal
when working on installation that wearing a pair of shoes with rubber
