8
Cable Entry and Wiring Configuration
Position the Junction box as far away from the revolving mechanism
(dome) as needed to ensure the cable will not foul as the unit rotates.
Some thought should be given to positioning the junction box over an
internal cavity like a cupboard. The cable length from the dome is 3.5M.
Drill a 1 inch hole to allow easy insertion of the wiring loom and signal cables.
IMPORTANT
- DO NOT permanently seal the cables/loom into the roof/wall cavity.
They should be fitted in such as fashion as to allow them to be easily removed (by
feeding through) should the rooftop mechanism ever require servicing.
Junction Box with
the loom from the
dome entering a 1”
hole into vehicle.
Wiring loom
shown from inside
the vehicle.
DO
NOT
seal them
permanently in the
roof cavity.
