Aaron SPORT ONE, Operation Manual

Presta  

(Sclaverand / French valve)

PRESTA AND DUNLOP VALVE: 

Place the pump head with the grey 

side marked „P“ on top of the valve. 

Twist the lever toward „P“. 

Note: Unscrew the small knurled 

nut on the Presta valve before 

placing it on the pump head. 

SCHRADER VALVE: 

Place the pump head with the 

black side marked „S“ on top of the 

valve. Twist the lever toward „S“. 

Note: Insert the valve very far into 

the pump head to open the fan 

pin.

1    

Suitable for the following valves

2    

Functionality

3

    Included equipment

5 

  Reviews

M a n u a l

4  

  Usage of tire patches

A 

First pump the defective tube with your floor pump and tighten    

the valve so that the air cannot escape. 

B 

Then put the tube bit by bit into a bucket of water. You can see air  

bubble rising at the place where the hole is located.  

C 

Now you have to roughen the tube with sandpaper around the    

 hole.

D 

Remove the protection film of the patches and press the patch    

for at least 20 sec on the dry, clean and dust-free hole.

Sandpaper

Tire patches

Ball needle

Adapter

Dunlop  

(Woods valve)

Schrader  

(Auto / Car valve)

Any problems mounting the 

pedals? If so please feel free to 

contact

 our support.

Please don‘t forget to give us your 

feedback / review

.