5) On the lower row of coals, starting at the left hand side,
place Coal 5 & 6 into the notches cut into the base matrix,
see FIG 13e. Coal 5 should be placed diagonally as
indicated, resting on both front and rear base matrices.
Coal 6 is placed face onto the front of the stove, this front
face is level with the front edge of the base matrix as
shown in FIG 13f.
Aarrow Sherborne GSL CF
Page 17
INSTALLATION INSTRUCTIONS
Coal Position Notch
FIG 13e.
FIG 13f.
FIG 13g.
6) Coal 7 should be placed diagonally
across front and rear base matrices, as
shown in FIG 13g. Coal 8, should be
positioned, so that it rests diagonally,
upon all four base matrices and is
therefore central to the fire box opening.
Note
: Coal 8, central,
across all base matrices.
