Copyright © 2015 AAS Technology
AH-13K
www.AAS.com.tw
2
R201508-V17
Panel View
..
VPH-100T
Installa
ti
on
..
1. Make sure any signal source (camera) and/or monitor/DVR are turned o
ff
during installa
ti
on.
2. Use DB15 to BNC cable to connect DVR and Transceiver.
3. Use network cable to connect DVR and Transceiver.
4. Connect cameras with receiver.
5. Check whether installa
ti
on is good and power the device(s).
6. Power camera, DVR, monitor, etc.
Speci
fi
ca
ti
on
..
16CH Power & HD Video UTP Transceiver
Model
AAS-VPHP15-16K
Transmission & Video
Proper
ti
es
Transmission Channel
16 Channels
Video Output
2x DB15 (DB15 to BNC pigtail Cable include)
Video In / Power Output
16x RJ45
Transmission Distance
Refer to ‘Table-1’ and ‘Table-2’ below
Power Output
12~15V DC Total <100W (each port <12W)
Compa
ti
ble Video Format
HD TVI, HD CVI, AHD / PAL, NTSC, SECAM
Signal Transmission Band
0~70MHz
An
ti
-interference
>60dB
Protec
ti
on Level
Coaxial Video Connector Surge
2KV per
：
IEC61000-4-5
UTP Cable Communica
ti
on
Connector Surge Protec
ti
on
2KV (di
ff
erent mode) ; 4KV (common mode)
per:IEC61000-4-5
ESD
Contact Discharge: 6000V ; Air Discharge: 8000V
Per: IEC61000-4-2 1995
Opera
ti
on Environment
Opera
ti
on Temperature
-10°C~50°C / 14°F~122°F
Storage Temperature
-40°C~85°C / -40°F~185°F
Humidity
0~95%
Physical Proper
ti
es
Dimension (L x W x H)
310 x 232 x 45 mm / 12.2 x 9.1 x 1.78 inches
Housing Material
Iron Metal and Plas
ti
c
Color
Black
Net Weight
1.76 kg / 3.88 lbs
*Speci
fi
ca
ti
ons are subject to change without no
ti
ce
NO.
Component
Descrip
ti
on
1
Power LED
Indicate if power supply is
normal
2
Power
Supply
Input
100V~240V 50-60Hz
power input connector
3
RJ45
The green LED light on
indicates working status
The yellow LED light on
indicates over-current
protec
ti
on
4
VGA
Video output
BNC-M
DC-M
