background image

 

2

 

 

 

 

 

 

 

Disposal of Old Electrical & Electronic Equipment (Applicable in the European 

Union and other European countries with separate collection systems). 

This symbol on the product or on its packaging indicates that this product shall not be treated as household 

waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and 

electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential 

negative consequences for the environment and human health, which could otherwise be caused by 

inappropriate waste handling of this product. The recycling of materials will help to conserve natural 

resources. For more detailed information about recycling of this product, please contact your local city 

office, your household waste disposal service or the shop where you purchased the product. 

 

 

Caution   

 

 

 

 

 

 

 

 

 

      .. 

This product has been tested for conformance to safety regulations and requirements. However, 

like all electronic equipment, this product should be used with care. Please read and follow the 

safety instructions to protect yourself from possible injury and to minimize the risk of damage to 

the unit. 

1.

 

Handle this product with care

   

  Avoid any shock or bumping of the product. Improper handling could damage the product. Do 

not handle the unit with wet hands. Provide proper ventilation and air circulation and do not 

use near water. 

2.

 

Requires a proper operating environment

   

  This product is not waterproof and is designed for indoor use. The allowable temperature 

range for operation of this product is between 0

°

C~40

°

C / 32°F~104°F. 

 

3.

 

Check the power source voltage

   

  The power source voltage should be within the specified range. (Product must meet the 

specifications).   

4.

 

Objects and liquid entry

   

  Never push objects of any kind into this product as this may touch dangerous voltage points of 

short out parts that could result in a fire or electric shock. Never spill any kind of liquid on the 

product.   

5.

 

Cleaning

   

  Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device 

before cleaning. 

 

  Please read the Manual before attempting to use this product.

 

Specifications and appearance are subject to change without notice. 

 

Summary of Contents for HD-SDE-122









Reviews: