Getting started
8
Getting started Aastra 470
syd-0419/1.0 – R1.2 – 10.2011
Adding IP and SIP system phones
Register an Aastra 5300 IP system phone
Set up the phone in the communication server:
1. In the WebAdmin configuration assistant go to step
09. Open users
.
2. Create a user with the
New
button. Enter the call number and assign the main
properties.
3. Go to the configuration assistant step
10. Open phones
.
4. Select
Terminal Interface
=
IP
and create an IP phone with the
New
button.
A message may be shown, telling you that not enough licences are available.
You can ignore the message here, since you will check the licences in a later step.
5. Select the phone type (
terminal type
), assign the phone to a user and click the
Apply
button.
You will see the automatically generated registration code (
Registration code
),
which is usually the user’s call number. You will need the registration code later
to register the phone on your system.
Set up the phone itself:
1. Add the expansion key modules to the IP system phone.
2. Connect the IP system phone to the IP network and to the power supply using
the optional power adapter. If your IP network supports PoE, no power adapter
is required.
3. On the IP system phone, keep the C-key pressed down to access the local
Admin-
istration
menu on the phone. To change the settings you have to enter the ad-
ministrator password first (default =
0000
).
4. Set the static IP address of the communication server (
PBX address)
.
5. Set the static IP address of the FTP server (
FTP server address
). Use the same IP ad-
dress as for the communication server.
6. Restart the phone and enter the registration code.
The phone registers on the communication server. If a new phone software is
available it is automatically updated and the phone restarts again.
