Operator phone
Aastra 5380/Aastra 5380ip
123
eud-1282/1.3 – R3.0 – 04.2013
Setting the operator phone
You can configure up to 10 line keys on level 1 of an Aastra M535.
Adding and setting operator phone lines
You can make a number of settings that affect the telephone's response when some-
one calls on a Line key.
Note:
The settings are made once for all the Line keys.
Menu
Setting up the operator phone:
Press the
Menu
Foxkey.
Settings
Scroll to
Settings
and press the
Select
Foxkey.
Operator phone
Scroll to
Operator phone
and press the
Select
Foxkey.
Company A
/
Company B
Depending on the configuration select
Company A
or
Company B
.
➔
The display shows the properties with which you can configure the Line key.
<Audio setting>
Select the required audio setting and confirm with the
Ok
Foxkey.
Setting possibilities for ringing:
•
Off
for no ringing tone,
On
for instant ringing tone, and ringing tone
After
10s
,
After 20s
and
After 30s
and confirm with the
Ok
Foxkey.
•
Melody
and
Speed
: You can listen to each setting using the
Test
Foxkey.
Setting possibilities for answering mode:
•
Key
to answer the call by pressing the line key,
Handset
to answer by picking
up the handset, and
Hands-free
to answer automatically with hands-free.
• Using
Handset
or
Hands-free
you must also specify the
Priority
with 1 being
the highest priority, and 8 the lowest. This setting is useful for the two-com-
pany systems.
• The
Handset
and
Hands-free
settings only work when the ringing signal is
activated.
