Personalizing your phone
Aastra 5380/Aastra 5380ip
111
eud-1282/1.3 – R3.0 – 04.2013
Clearing a key
You want to clear the assignment made to a configurable key.
Select the function
No function
to delete the function key assignment.
<Audio setting>
Set the Audio settings:
Scroll to the required audio settings and press the
Modify
Foxkey. Select the
required setting and confirm with the
Ok
Foxkey.
➔
The setting is stored.
Setting possibilities for ringing:
•
Off
for no ringing tone,
On
for instant ringing tone
After10s
,
After20s
and
ringing tone
After30s
and confirm with
Ok
Foxkey.
• You can listen to each setting using the
Test
Foxkey.
Answer
Setting the answering mode:
Scroll to
Answer
and press the
Modify
Foxkey.
Select the required setting and confirm with the
Ok
Foxkey.
➔
The setting is stored.
Setting possibilities for answering:
Key
to answer the call by pressing the Team key,
Handset
to answer by picking
up the handset, and
Hands-free
to answer automatically with hands-free.
Notes:
• The
Handset
and
Hands-free
settings only work when the ringing signal is
activated.
• If you select answer using
Handset
or
Hands-free
, you must also specify the
Priority
, with 1 being the highest priority, and 8 the lowest:
<long>
No function
To clear the Foxkey:
Press the Foxkey with a long keystroke.
➔
The display shows the key type.
Scroll to
No function
and confirm with the
Ok
Foxkey.
➔
The key configuration is cleared.
<long>
No function
To clear a configurable key:
Press the configurable key and hold it down for a moment.
➔
The display shows the key type.
Scroll to
No function
and confirm with the
Ok
Foxkey.
➔
The key configuration is cleared.
