Personalizing your phone
Aastra 5380/Aastra 5380ip
115
eud-1282/1.3 – R3.0 – 04.2013
Configuring Line Keys
This section explains how to adapt your Line key settings to suit your personal
requirements.
Your system administrator will determine whether your phone has Line keys.
Setting the Response of a Line Key
You want to set the response of a line key.
You can choose whether you also want a ringing signal in addition to the flashing Line
key when you receive a call on a Line key. You can configure a ringing delay for the
ringing tone.
To answer a call you can choose between answering directly by pressing the Line key,
picking up the handset, and using automatic hands-free operation.
Answering an external call using automatic hands-free operation is not available.
The following audio settings are possible:
Ring
,
Melody
,
Speed
,
Answer
.
Notes:
• A Line key can only be allocated to a configurable key.
• To find out how to use a line key, refer to the Chapter
<long>
Press the Line key you want and hold it down for a moment.
➔
The display shows the Line key and the properties with which you can con-
figure the Line key.
Note:
The Personal key is also treated as a line key.
Line key
Scroll to
Line key
and press the
Select
Foxkey.
<Audio setting>
Set the Audio settings:
Scroll to the required audio settings and press the
Modify
Foxkey. Select the
required setting and confirm with the
Ok
Foxkey.
➔
The setting is stored.
Setting possibilities for ringing:
•
Off
for no ringing tone,
On
for instant ringing tone
After10s
,
After20s
and
ringing tone
After30s
and confirm with
Ok
Foxkey.
• You can listen to each setting using the
Test
Foxkey.
