Network Settings
4-38
41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Configuring the IP Phones
To set VLAN ID and priority for LAN Port (Port 0):
13
Select
Phone VLAN.
14
Select
Phone
VLAN ID
and enter a value from
1
to
4094
to specify the VLAN ID for the LAN Port.
Default is
1
.
15
Press
Done
to save the change.
16
Select
VLAN
Priority
.
17
Select one of the following VLAN Protocols:
•
SIP Priority
•
RTP Priority
•
RTCP Priority
18
Enter a VLAN priority value from
0
to
7
for the associated Protocol. Default values for each Protocol
are:
SIP Priority = 3
RTP Priority = 5
RTCP Priority = 5
19
Press
Done
(3 times) to return to the VLAN Settings menu.
To set VLAN ID and priority for PC Port (Port 1):
20
Select
PC Port VLAN
.
21
Select
PC Port VLAN ID
.
22
Enter a value from
1
to
4095
to specify the VLAN ID for the PC Port.
Default is
1
.
Note:
If you set the PC Port VLAN ID (Port 1) to
4095
, all untagged packets are sent to this port. The
following is an example of configuring the phone on a VLAN where all untagged packets are sent to
the PC Port (passthrough port).
Example
You enable tagging on the phone port as normal but set the passthrough port (PC Port) to
4095. The following example sets the phone to be on VLAN 3 but the passthrough port is
configured as untagged.
VLAN Settings->VLAN Enable: Yes
VLAN Settings->Phone VLAN->Phone VLAN ID: 3
VLAN Settings->PC Port VLAN->PC Port VLAN ID: 4095
IP Phone UI
Step Action
