Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-00, Release 2.1, Rev 04
A-141
Configuration Parameters
Appendix A
Parameter
–
softkeyN value
Value
(In WEb UI)
Aastra Web UI
Operation->Softkeys and XML
Configuration Files
aastra.cfg, <mac>.cfg
Description
This is the value you assign to the softkey.
The “
softkeyN value
” parameter can be set for the following softkey types
only:
•
speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial softkey; you then
enter the rest of the number from the keypad on the
phone.)
•
BLF
•
sprecode
•
Park
•
Pickup
•
dcp
•
XML
Notes
:
1.
For speeddial - Value is the phone number, extension, or prefix
number to enter for the softkey.
2.
For blf - Value is the extension you want to monitor.
3.
For sprecode - Value is dependent on services offered by server.
4.
For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values”
on
page 5-157
. For
Park/Pickup examples, see Chapter 5, the section,
“Model 57i/57i CT
Examples”
on
page 5-155.
5.
For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
•
$$SIPUSERNAME$$
•
$$SIPAUTHNAME$$
•
$$PROXYURL$$
•
$$REMOTENUMBER$$
•
$$DISPLAYNAME$$
•
$$INCOMINGNAME$$
Format
Integer
Default Value
Not Applicable
Range
N/A
Example
softkey1 value: 9
softkey2 value: 411
softkey4 value: http://10.50.10.140 script.pl?name=$$SIPUSERNAME$$
softkey5 value: (example of a speeddial prefix)
