7
Installing/removing a mounting bracket or rotary clip
Aastra 610d, 612d, 620d, 622d, 650c
Place the supplied fixing bracket on both openings at
the upper end of the handset and snap in place by
pressing downwards. To remove the fixing bracket,
press into the small cutouts at the edge of the bracket
and pull the two sides slightly apart.
All devices can also be fitted with a rotary
clip as an accessory.
Aastra 610d, 612d, 620d, 622d, 650c
Place the supplied fixing bracket on both openings at
the upper end of the handset and snap in place by
pressing downwards. The clip is then pushed onto the
protruding button. To release the handset from the
clip, press the top button.
Aastra 630d, 632d
You have to remove the fixing bracket and replace it
with the supplied rotary swivel.
Attaching the carrying strap
Aastra 610d, 612d, 620d,622d, 650c
: There are two
openings in the upper part of the fixing bracket. Feed
the lower end of the carrying strap through these ope-
nings (please install with the fixing bracket removed).
Carrying straps are available as accessories (see page
83).
Aastra 630d, 632d:
A carrying strap with carrying
strap attachment is available as an accessory. To attach
the holder, replace the screwed-on belt clip by the car-
rying strap attachment.
Installation
