37
Basic functions
start (in the case of the No movement alarm, also with any keypress – as of Release 4.01). The delay
can be set separately for each alarm type.
Pre-alarm
This is the period of time during which an alarm tone – where activated – is signalled on the hand-
set before the alarm number is dialled. To deactivate the alarm tone (and therefore deactivate the
alarm), you need to press the
Esc
softkey. During the pre-alarm the display reading indicates the
amount of time remaining before the alarm number is dialled.
If during the pre-alarm the triggering event is withdrawn for at least 4 seconds in the case of "man-
down" and for at least 2 seconds in the case of the no movement alarm, the delay starts all over
again.
The escape alarm can only be withdrawn using the
Esc
softkey.
The time setting for the pre-alarm is made for all the alarm types jointly and can also be made using
vibrator call.
Settings for other alarm parameters
Alarm number
If the SOS emergency number is predefined by the system, this menu item is not displayed.
If you always store the SOS emergency number preceded by the R-key feature (enquiry / hold), the
emergency call can also be made during a call (depending on the system / and handset – see
above). To enter the R-key feature, press the #-key three times (see also page 24).
Alarm auto answer
If this function is activated, a call is answered automatically from any call number during the pre-
alarm.
If the function is deactivated and an incoming or existing call is in progress during the pre-alarm, the
alarm call number is dialled at the end of the pre-alarm.
Regardless of the setting, calls from the alarm number or SOS emergency number are answered
automatically and the pre-alarm is terminated.
Alarm tone
The pre-alarm can be sounded with or without an alarm tone on the handset. If the alarm tone is
activated, the signalling volume increases progressively.
Incident:
Mandown, no movement
escape identified
Delay
Pre-alarm
with/without alarm
tone on the handset
Alarm number is dialed
