50
System
In this menu you can specify the active system for your handset and administer registrations to diffe-
rent systems as well as read the IPEI number and information on the status of hardware and soft-
ware.
System menu
This menu enables you to set automatic call-back and call waiting functions.
Settings
Device settings, such as key lock, key programming, user name, display settings, illumination,
Blue-
tooth
etc., are available here.
Protection functions
This menu can be accessed via the PIN (Personal Identification Number). On delivery, it is 0-0-0-0 (4 x
zero). Here you can block the handset (lock), change the PIN, program an emergency number, enter
settings for the alarm sensor (in 630d / 632d only) as well as completely or partially reset the hand-
set to its state on delivery.
Profiles
This menu is used to create and administrate user profiles. Five modifiable profiles are preset.
Feature access codes
This menu allows to enter Feature access codes (FAC) to control various functions in your system.
The entry of FAC's will only be offered if supported by your system.
"Info" menu
Caller list
Displays the entries in the local caller list or the system’s caller list. If a phone book
entry has been created for a phone number (either on the handset or in the sys-
tem), the corresponding name is displayed.
The
❯❯❯
options available to you with the local caller list are as follows:
Dial number...
Dials the phone number.
Predial
Transfers the phone number to the predial.
Add to…
Adds the phone number to the phone book, the call filter
or the VIP list.
Details…
Displays information about the entry.
Devices menu