66
Device options
Silent charging
The handset does not give an acoustic signal for any calls when it is in the char-
ger cradle. When you take it out, calls are acoustically signalled again. The calls
are recorded in the call list.
“Silent Charging“ will not apply when the handset is charged via the USB con-
nector.
Auto. key lock
If this option is active, the keyboard is automatically locked after set time (5 ...
240 s) if no key is pressed. PIN lock on/off.
Charger answer
If this feature is active, the handset automatically answers a call if it is taken out
of the charger cradle.
Auto. answer (call)
With this feature the handset answers a call automatically. Only activate this
feature if your work requires it as it is then possible for the caller to listen in
unnoticed. For safety reasons Auto answer is initiated using 3 attention tones
and its actuation is signalled during the call by the rapidly flashing green LED.
This feature is useful if you need to be informed immediately about important
matters (e.g. when on standby). This feature also simplifies procedures when
operating the handset with a headset. Press
Change
to activate or deactivate.
You can set the following options:
Time
Sets the amount of time after which Auto answer should be activa-
ted:
0 ... 20 seconds
.
Please note
: If your device supports the features Text messaging
and/or Paging, do not set any value under 3 seconds.
Mode
Allows you to select the auto answer mode (Headset/Earpiece, Cor-
ded headset, Bluetooth, Charger handsfree, Handsfree).
Microphone
Lets you answer the call automatically with or without activated
microphone. You can also activate the microphone after the call
using the softkey
.
LED indication
Lets you activate or deactivate the LED indication during a call.
Attention tone
Lets you activate or deactivate the attention tone at the start of
Auto answer.
Devices menu
