Configuring Softkeys
41-001524-00 REV01 – 07.2014
81
Park/Pickup Keys
The 6867i phone has a park and pickup call feature that allows you to park a call and pickup a call when required. The IP
phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ call managers.
The park/pickup feature performs as follows:
•
When a call comes in and you pickup the handset, you can press the applicable
Park
key to park the call
•
After the call is parked, you can press the
Pickup
key, followed by the applicable value to pickup the call
Administrators can configure the
Park
and
Pickup
keys for any line using the configuration files or the Aastra Web UI.
Users can make changes to customize the label of the
Park
and
Pickup
keys using the Web UI.
Configuring Park/Pickup Keys Using the Aastra Web UI
Aastra Web UI
1.
Click on
Operation > Softkeys and XML
.
or
Click on
Operation > Expansion Module <N>.
Softkeys
2.
Select from
Key 1
through
Key 20
on the Top keys.
or
Select from
Key 1
through
Key 18
on the Bottom keys.
3.
In the
Type
field, select
Park
.
4.
In the
Label
field, enter a label for the
Park
softkey.
Note:
The
Value
and
Line
fields are configured by the Administrator.
5.
In the state fields, check (enable) or uncheck (disable) the
Connected
state for this softkey.
6.
Select from
Key 1
through
Key 20
.
7.
In the
Type
field, select
Pickup
8.
In the
Label
field, enter a label for the
Pickup
softkey.
Note:
The
Value
and
Line
fields are configured by the Administrator.
9.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
10.
Click
Save Settings
.
11.
Click on
Reset
, then click
Restart
to restart the IP phone and apply the changes.
Expansion Module Keys
12.
Select from
Key 1
through
Key 16
.
