6/1553-DBC 433 01 Uen D2 2014-03-26
60
C
ONTACTS
8.2
Adding a Contact
There are three ways to add a contact:
•
Manually add a new contact.
•
Add a number from the call list.
•
Add contact from the web interface, see 14.3.1 Contacts Folder on
page 98.
8.2.1
Adding a New Contact
To add a new contact, do the following:
1.
Press .
2.
Press
more...
.
3.
Select
Add new manual input
, and press
Select
.
4.
Enter a number, and press
OK
.
If you make a typing mistake, press the volume down key or
more...
and select
Erase
or
Erase all
.
5.
The new contact is added, with the number saved also as name.
Note:
If you would like to edit the name, number or ring signal
for this contact, press
more...
, and select what to edit. For more
information see section 8.3 Editing a Contact on page 61
6.
Press
Done
to save the new contact.
8.2.2
Adding a Contact From the Call List
To add a contact from the call list, do the following:
1.
Press .
2.
Press
more...
.
3.
Select
Add new from Call List
, and press
Select
.
4.
Select the number to add as a contact, and press
Add
.
5.
Note:
If you would like to edit the name, number or ring signal for
this contact, press
more...
, and select what to edit. For more infor-
mation see section8.3 Editing a Contact on page 61.
6.
Press
Done
to save the number as one of your contacts.
Note:
External number must be preceded with the external access
code. The external number can also be stored by adding the
