background image

IP P

HONE

 

FOR

 MX-ONE™

63

6/1553-DBC 433 01 Uen D2 2014-03-26

8.4 

Deleting a Contact

It is possible to delete a selected contact, or all contacts at once.

8.4.1 

Deleting One Contact

To delete a contact, do the following:

1.

Press .

2.

Select a contact and press 

more...

.

3.

Select 

Delete

 

[contact]

 and press 

Select

A confirmation message is displayed.

4.

Press 

Yes

 to confirm or 

No

 to cancel.

8.4.2 

Deleting All Contacts

To delete all contacts in the contact list at the same time, do the 
following:

1.

Press .

2.

Press 

more...

.

3.

Select 

Delete all contacts

 and press 

Select

.

4.

Press 

Yes

 to confirm or 

No

 to cancel.

8.5 Corporate 

Directory

The corporate directory, which holds all contacts in your organization, 
resides on a corporate directory server.

When you search a contact in the corporate directory, a request is sent 
to the corporate directory server, which returns a list of names that 
matches the search. You can then choose to view the contact details, to 
call the contact, or to add it to your personal contacts. 

8.5.1 

Searching a Contact In the Corporate Directory

To call a contact in the corporate directory, do the following:

1.

Press 

 and select 

Corporate Directory

.

2.

Enter the name or number you wish to search and press 

Search

.

Summary of Contents for 7433ip













































































































Reviews: