Aastra 9143i Series Administrator'S Manual Download

Page: 568 / 1140

Operational Features

5-262

41-001160-04 Rev 02, Release 2.5

IP Phone Administrator Guide

Select a state for the account(s) in focus using the

and

DOWN

arrow keys.

You can enable/disable any or all of the following states for an account:

•

All

- Enables

CFWD All

for an account and forwards all incoming calls for that account, to the

specified number.

•

Busy

- Enables

CFWD Busy

for an account and forwards incoming calls to a specified number if

DND has been enabled for that account OR if the account is currently engaged in another call.

•

No Answer

- Enables

CFWD NoAns

for an account and forwards incoming calls to a specified

number if the call has not been answered for the specified number of rings.

Note:

CFWD All

AND

CFWD Busy

AND

CFWD NoAns

are all enabled (and/or if the account has

DND enabled), the

CFWD All

settings take precedence over

CFWD Busy

and

CFWD NoAns.

You can also use the following keys if required:

All Off

- Disables all CFWD states for the current account in focus.

All On

- Enables all CFWD states for the current account in focus.

Press the

CHANGE

key for the state you selected in step 3. Scroll to the CFWD State screen. This

displays the current state of the mode you selected. In the following example, the CFWD All state is
ON.

Press the

CHANGE

key in the CFWD State screen. Press

NEXT

to toggle the state of the CFWD

mode ON or OFF. In the example in Step 4, you press

NEXT

to change the option to

OFF

Press the

SET

key to save the change.

Aastra IP Phone UI

Step

Action

CFWD State
Screen

1. Cfwd All

1. Cfwd State

Done

Change

Cfwd State

Set

Cfwd State

Off

Set

Use to view

Change

Summary of Contents for 9143i Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 9143i Series

Reviews:

Related manuals for 9143i Series

Brands by name

Popular brands

Aastra 9143i Series, Administrator'S Manual

Search results

Summary of Contents for 9143i Series

Reviews:

Related manuals for 9143i Series

Brands by name

Popular brands