Aastra 9143i Series Administrator'S Manual Download

Page: 618 / 1140

Operational Features

5-312

41-001160-04 Rev 02, Release 2.5

IP Phone Administrator Guide

To edit an entry in the Directory List:

At a line item in the Directory List, press the

key.

Note:

Use the

SAVE

key to scroll between the number, name and line entries.

Edit the phone number if required and press

SAVE

Edit the name if required and press

SAVE

Edit the line if required and press

SAVE

Press

SAVE

to save the changes and exit the editing function.

To delete an entry from the Directory List:

At a line item in the Directory List, press

DELETE

. The following prompt displays:

“

DELETE again to erase this item

”.

Press DELETE again to delete the entry from the Directory List.

Note:

To cancel a delete function, press the

or the

scroll keys.

To delete all entries from the Directory List:

At the Directory List header, press

DELETE

DELETE LIST

(depending on your phone model).

The following prompt displays:

“

DELETE again to erase all items

”.

Press DELETE again to delete all entries from the Directory List.

Note:

To cancel a delete function, press the

or the

scroll keys.

IP Phone UI

Step

Action

Summary of Contents for 9143i Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 9143i Series

Reviews:

Related manuals for 9143i Series

Brands by name

Popular brands

Aastra 9143i Series, Administrator'S Manual

Search results

Summary of Contents for 9143i Series

Reviews:

Related manuals for 9143i Series

Brands by name

Popular brands