51
Telephoning
The subscriber called through the enquiry call is busy:
Press the end key. The connection is put through.
or
Press the R key. You are through once again to the waiting subscriber.
or
Briefly press the
❯❯❯
menu.
Use the navigation keys to select the Select line menu entry and the call key of the sub-
scriber who is waiting.
When the called subscriber picks up or when he terminates his call, he will obtain the
waiting call. If the proposed connection is not answered within a specific period of time
(preset at 45 seconds), you obtain a recall. After pressing the call key (green) you are
once again through to the original call partner.
Handing a call over to an external subscriber
An external call can only be handed over to an external subscriber via the menu if a subscriber is on
hold (see ten).
Briefly press the
❯❯❯
menu.
Use the navigation keys to select the Transfer menu entry.
If you call an external call partner and then hand that party over to another external
subscriber, the costs of the call will be at your expense. You have no control over how
long the forwarded call will last. The connection is switched via the OpenCom 1000,
taking up two call channels (ISDN B channels).
Menu if subscriber is on hold
Version 1:
During an enquiry call briefly press the menu key
❯❯❯
, then select …
•
Select line
You obtain a summary of any call keys / lines available on your handset.
Select the call key of the waiting subscriber.
