Ascotel® IntelliGate® 150/300 as of I7.9
Configuration
143
sy
d-
021
0/1.
7
– I7.
9 – 1
2.
2009
profile in which the "
Office 45
" interface access is enabled. The profile also needs to
be assigned the AIMS authorization level "
Attendant
" if the remote access status is
to be changed.
5. 3. 4
Password-free access
The control pilot key on the connector strip can activate a function that enables via
AIMS password-free, local access with administration right "
User access control"
. The
local access is possible via the V.24 interface of a Pocket Adapter or with a LAN ca-
ble. This is useful for example if all the passwords have been lost. The procedure is
described in
"Enabling / disabling password-free access", page 184
There is no password-free access for remote maintenance.
Password-free access with the System Assistant on the Office 45 is also possible,
but without the possibility of changing the status of remote access.
5. 3. 5
Automatic exit from the configuration
The PBX will interrupt access to the system configuration if you do not make any
changes ("
View
"
→
"
Options
" under "
Online Connections
") to a parameter value or
do not make use of the navigation system during the set disconnect time
5. 3. 6
Access log
The PBX draws up an access log for each user account so that the history of ac-
cesses to the configuration can be tracked. Denied access attempts using errone-
ous or incorrectly type passwords are also logged.
The logs can be read by any user.
Retrieving the log data
The PBX monitors and saves all the accesses as well as failed access attempts. These
lists can be retrieved locally or remotely.
CLIP verification
If the setting "
CLIP required
" is set to "
Yes
" in the configuration, remote retrieval is
possible only if the retrieving party logs in using a CLIP. The CLIP number is also re-
corded by the access log.
