Ascotel® IntelliGate® 150/300 as of I7.9
162
Operation and Maintenance
sy
d-
021
0/1.
7
– I7.
9 – 1
2.
2009
See also:
For information on event messages and signal destinations, see
Initiating an upload process
To ensure a successful software upload, carry out the following preparatory steps:
1.
Recommendation: Use AIMS to save the configuration data (
Tools
→
Backup
).
2.
If necessary: Save the wave files (Voice Mail, Courtesy and Music on hold) (
Tools
→
Partial download
→
Download wave files
).
3.
Call up the AIMS Upload Manager.
4.
Select the "
Configuration
" tab.
5.
Enter user name and password (changed) of a user account.
Note: To perform the upload, the user account must be assigned an authoriza-
tion profile for which the "
FTP
" interface access is enabled (see
6.
Select the system type.
7.
Click the "
Add
" button in the "
Software
" field and specify the zip file with the sys-
tem software you require.
→
The software version you have added appears in the list box.
8.
Select the software version you want from the list box.
9.
Select the PBX connection.
10.
Use the "
Settings
" button to set the connection parameters.
11.
Select the
Upload
tab.
12.
Set the time at which you want the newly loaded system software to be acti-
vated.
13.
Set the period of time during which you want the newly loaded system software
to be monitored for fault-free operation.
14.
Click the "
Upload
" button.
→
The upload process is now initiated.
Bar indicator
During the software upload a dialog box with a horizontal bar indicates the time
progress of the upload process.
