Ascotel® IntelliGate® 150/300 as of I7.9
176
Operation and Maintenance
sy
d-
021
0/1.
7
– I7.
9 – 1
2.
2009
6. 4
Generation Change
6. 4. 1
System Upgrade
All that is required to upgrade a system is new system software. The system up-
grade can be carried out on site or remotely with a version transfer.
1.
Initiate the upload process as described in the paragraph
. Select
"Start Now"
as the activation time.
2.
Once the upload is completed, the PBX resets and is then ready to operate again
with the new system software and the usual system configuration.
Notes:
– AIMS 7.6 and higher uses the Microsoft SQL Server database for its
data management. Borland Paradox was used up until AIMS 7.5.
During the AIMS 7.6 installation process the existing data stock of
the Borland Paradox database is transferred to the Microsoft SQL
Server database and adapted. The existing Paradox database is pre-
served. Only generation >= I7.0 PARADOX databases can be trans-
ferred. The Paradox database can also be subsequently imported.
The relevant instructions can be found in the AIMS Help. Please also
refer to the version notes for AIMS 7.6 in the readme.txt file.
– An Aastra 5370ip logged on to the system as an Office 35IP prior to
the upgrade to I7.5 (= Office 70IP-b) can still be used. If the terminal
is logged on to the system as an Aastra 5370ip a software update is
automatically initiated. One licence per terminal is required to oper-
ate the IP system terminals.
