Ascotel® IntelliGate® 150/300 as of I7.9
Operation and Maintenance
207
sy
d-
021
0/1.
7
– I7.
9 – 1
2.
2009
3.
Repeat the procedure for all the destinations
4.
Switch the parameter "
Destination SNMP event message
" to "
On
"
SNMP stands for "Simple Network Management Protocol" and is used by Network
Management Systems (NMS). Ascotel® supports the version SNMP V1.
If the Network Management System is to know the potential events of the PBX, the
corresponding system components have to be defined in the form of configurable
objects (Managed Objects: MO). These objects and the related event messages are
stored in an object library referred to as the Management Information Base (MIB).
The current MIB version can be downloaded from
. The
user name and password are required in order to access the data. Registration with
the "Aastra Application Parter Programm" is required.
6. 6. 2
System Event Manager SEM
The System Event Manager (SEM) is a program capable of receiving and handling
PBX event messages. It consists of the components:
•
SEM Configurator
•
SEM Server
•
SEM Viewer
Fig. 82
SEM concept (general)
Event messages are sent to the SEM Server by the PBX. The SEM Server stores all
the important data in the corresponding AIMS database. This data can be retrieved
and edited using the SEM Viewer.
SEM Configurator
The SEM Configurator is used to start or end the SEM Server.
haz1194aaena0
PBX
Event
message
SEM Server
SEM Configurator
AIMS
database
Multi-user
SEM Viewer
