Personalizing Your Phone
50
Setting the Volume during a Call
You want to adjust the volume while in a call.
The new volume will remain stored even after the call is ended.
Changing your Personal Code
You want to change the personal code used for locking / unlocking your phone (see "Locking your
phone" and "Unlocking your phone").
The factory setting is digit combination "0000"; you can select any 2 to 10-digit combination for your
new code.
If you have forgotten your personal code, your system administrator can reset it to the factory setting.
Set the sound volume with the rocker switch.
<long>
Press the Menu key and hold it down for a moment.
The configuration mode is now activated.
Press the Menu key repeatedly until the display shows "Code".
Code
Press the "Code" Foxkey.
The display shows "Old code:".
Use the digit keys to enter the current code.
For each digit entered, the display shows an "*".
OK
Press the "OK" Foxkey.
The display shows "New code:".
Use the digit keys to enter the new code.
For each digit entered, the display shows an "*".
OK
Press the "OK" Foxkey.
The display shows "Confirmation:".
Use the digit keys to enter the new code a second time.
For each digit entered, the display shows an "*".
OK
Press the "OK" Foxkey.
You hear the acknowledgement tone. The new code is stored.
☛
☛
☛