Installation and Maintenance Manual - Aastra 5000
AMT/PTD/PBX/0058/4/6/EN
Description des sous-ensembles
01/2011
Page
255
4.13.7.2 Physical description (see Figure 4.49 )
Connectors
The
connector
J2
is reserved for factory tests.
This card has no external connections.
Indicators The indicators are located on the card circuit and not on the front panel.
TABLEAU 4.67 PRESENTATION OF THE CP1 CARD INDICATORS
4.13.7.3 Hardware configuration
Jumper SW1 must be configured as shown on the diagram, with slots 1 and 2 connected
together.
4.13.7.4 Installation and wiring
This card has no external connections.
NAME
STATE
EXPLANATION
CR1 (red)
On steady
Incorrect operation
CR2 (red)
Flashing rapidly
Card in service
Summary of Contents for AXD
Page 16: ...AMT PTD PBX 0058 4 6 EN Installation and Maintenance Manual Aastra 5000 Page 16 01 2011...
Page 20: ...AMT PTD PBX 0058 4 6 EN Installation and Maintenance Manual Aastra 5000 Page 20 01 2011...
Page 22: ...AMT PTD PBX 0058 4 6 EN Installation and Maintenance Manual Aastra 5000 Page 22 01 2011...
Page 26: ...AMT PTD PBX 0058 4 6 EN Installation and Maintenance Manual Aastra 5000 Page 26 01 2011...