119
41-001484-11 Rev00 – 09.2013
Care and Cleaning
Touch Screen
•
Clean the BluStar 8000i touchscreen with an isopropyl alcohol and water solution mixed in a 50:50 ratio.
•
Spray the cleaner onto a soft, non-abrasive cloth; then apply the cloth to the touchscreen to clean.
•
Do not apply the cleaning solution directly to the touchscreen.
•
Do not allow any liquid to run down the surface of the touchscreen and under the bezel.
•
Do not rub, touch or tap the surface of the screen with sharp or abrasive items such as a ball-point pen or a screw
driver.
Camera
•
Avoid touching the camera lens with any object including your fingers. Damage to the lens or lens coating may result.
•
Avoid positioning the camera where direct sunlight or other spot source(s) of light might enter the lens.
•
Use a source of clean, dry air to gently blow dust and other particles away from the lens surface. If this fails to clean
the lens,
carefully
use a lens cleaning brush or lens cleaning tissue to clean the lens.
Desktop Cabinet and Handset
•
Clean the cabinet and handset with a soft cloth lightly moistened with a mild detergent solution.
•
Do not apply the cleaning solution directly to the cabinet or handset.
Note:
Avoid using any type of abrasive pad or cloth, caustic or abrasive cleaner, or solvents such as benzene when cleaning
the terminal components.