Application Menu
57
41-001484-11 Rev00 – 09.2013
To Clear Stored Pictures:
To Manually Check for Updates:
To Configure the Power Saving Schedule:
1.
Touch the
Clear Stored Pictures
button.
Notes:
Please contact your system administrator before you upgrade.
1.
Touch the
Check for Update
button.
2.
Select
Restart and Install
or
Continue
if there are no updates available.
3.
If you don't have to configure anything else on the screen, press
Done
.
1.
Touch the
Power Saving Schedule
button.
2.
Under
Work Days
, touch the buttons corresponding to the days of the week that you are normally at work.
or
Touch the
All
button if your normal work week consists of all the days of the week.
3.
Under
Work Hours
, enter the
Start
and
End
time of your weekday work schedule by touching the hour (HH) and
minute (MM) fields and using the on-screen keyboard. If your terminal is in 12-hour mode, touch the
AM/PM
button
to toggle between the two options.
4.
Enter the
Start
and
End
time of the your weekend work schedule by touching the hour (HH) and minute (MM) fields
and using the on-screen keyboard. If your terminal is in 12-hour mode, touch the
AM/PM
button to toggle between
the two options.
or
Touch the
Same as Weekdays
button if your weekend work schedule is the same as your weekday work schedule.
Note:
The term “weekday” for the Power Saving Schedule feature on the BluStar 8000i refers to the days from Monday to Fri-
day. The term “weekend” refers to Saturday and Sunday.
5.
If you don‘t have to configure anything else on the screen, touch
Done
.
