Application Menu
45
41-001514-01 Rev00 – 09.2013
Tools
The tools screen’s preferences panel allows you to do the following:
•
Enter
(login name, display name, and password) and define if the current account should be used as an
autologin account
•
Assign custom
to various BluStar for Conference Room actions
•
–
Configure whether or not your terminal automatically answers incoming calls
–
Define call forwarding rules
–
Adjust the transmit and receive rates
(bandwidth)
–
Configure layout options
–
Enable or disable call security features
•
Specify the
connection settings used by the system to communicate with your network
•
Use
to clear stored pictures, reset the system to factory defaults, configure the power saving schedule, and
configure the display settings
•
from Microsoft Exchange
•
User Identity
The user identity is pre-configured by the system administrator. If you have any questions about your user identity,
please contact your system administrator.
Users may, however, have the ability to configure the autologin feature on this screen. If the feature is enabled, the BluS-
tar for Conference Room can automatically log in to a specified default account upon a manual restart, forced restart, or
cold reboot. These three processes can be defined as follows:
•
Manual restart - user initiated (e.g. when a user selects the
Restart
button).
•
Forced restart - software initiated but influenced by a user’s action (e.g. when a user changes a terminal setting
whereby the device requires a restart for the setting to take effect).
•
Cold reboot - when a software upgrade has been initiatedor when an interruption of power has occured (e.g. power
failure or power cycle).
This feature is especially useful when a BluStar for Conference Room is configured for one primary account as it ensures
that the account is logged in automatically even after a cold reboot has occurred.
Note:
Settings on this screen that the user cannot edit are represented by grey text. Please contact your system administrator
for assistance with information entered in the user identity fields.
Notes:
•
If a BluStar for Conference Room is in a locked state before a forced restart, the device will still retain its locked state
after it is restarted and automatically logged in.
•
The configured autologin account will be removed if the BluStar for Conference Room is reset to factory defaults.
