background image

73

41-001514-01 Rev00 – 09.2013

Handling Calls

You can handle calls on the BluStar for Conference Room by placing calls on hold, transferring calls, and joining calls in a 
conference. 

During Calls

During a video or voice only call you can select the 

Options

 menu on the callers window to do the following:

Adjust or mute the volume of the party

Add the party to your address book

Remotely assume control of the remote party’s HD camera (only if the remote party is a BluStar for Conference Room 
user and the call is a video call)

Bring up a tonepad to dial another party

Disconnect the party

If you are in a video call and you click the 

Voice Only

 button, your camera will turn off the video and the screen will show 

your callers contact information. 

To Mute Your BluStar for Conference Room:

To Mute a Caller:

Notes: 

For detailed instructions on how to handle calls using the S850i Wireless Conference Phone System, please refer to the 
Aastra S850i Wireless Conference Phone System documentation suite.

1.

During a call, click the 

Audio Video

 button then 

Mute

.

The mute button on the screen is outlined in red, indicating your BluStar for Conference Room is on mute.

1.

During a call, click the

 Options

 button. 

2.

Click 

Mute

The button is outline in red, indicating that the callers microphone is off.

Summary of Contents for BluStar


























































































































Reviews: