6.1.5
End the call
To end a call:
•
Press .The display shows the duration of the call. The total time
of the call can also be retrieved from the calls tab
6.2
Parallel Ringing
Parallel ringing makes it possible for an incoming call to ring several
phones simultaneously and for the call to be answered on any of the
phones. The main advantage of this function is minimizing the risk of losing
calls. The function requires all the phones involved to be defined in a
parallel ringing list, which must be configured and initiated by your system
administrator.
Because only calls to a main extension will be distributed among the
phones in the list, this main extension also needs to be defined. A call to a
specific extension will not be distributed to other phones in the list, and will
only ring that specific extension's phone. Parallel ringing can be
temporarily disabled by the phone user using the function Internal Follow-
me. For more information on Internal Follow-me, see Section 10.2.
6.2.1
Disabling Parallel Ringing Temporarily
To disable Parallel Ringing temporarily, do the following:
1. Press *21*.
2. Enter the extension number.
3. Press #.
Note:
U.K., press *2*, extension number, #.
4. Press .
Wait for the call timer to start in the display.
5. Press to finish the procedure.
If you want to disable parallel ringing for all phones defined in the list,
follow the procedure for disabling the function from the phone with the main
extension number and enter the number of the answering position. If you
want to disable parallel ringing for one specific phone in the list only, follow
the procedure for disabling the function from this phone and enter its
extension number.
6.2.2
Restoring Parallel Ringing
To restore parallel ringing, do the following:
1424_EN_LZT103087.doc Rev B2 2009-09-11
©
Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
34
