1. Press #21# and .
Wait for the call timer to start in the display.
Note:
U.K., press #2#.
2. Press to finish the procedure.
Note:
If you want to restore parallel ringing for all phones defined in the
list, follow the procedure for restoring the function from the phone
with the main extension number and enter the number of the
answering position. If you want to restore parallel ringing for one
specific phone in the list only, follow the procedure for restoring
the function from this phone and enter its extension number.
7
Outgoing Calls
This section specifies ways of making outgoing calls, how to restrict your
number to not be displayed to the person you are calling, and how to call
the last external number dialed.
It is also possible to make a call from the contacts tab from the main menu,
see Section 8.
7.1
Calling
There are some different ways of initiating a call, described in the following
sections. The 25 last received, dialed or missed calls are stored in a call
list. The numbers can be either extension numbers or external numbers.
External numbers are preceded by the digit(s) for external call access.
To call a number that is not stored in the call list, do the following:
1. Enter the number and press
or Call.
The number is shown on the display while dialing.
2. If needed, press Clear to erase and edit the number.
Use the navigation key to step and add or delete a digit in the middle of
a number.
Note:
If you receive a queue tone when the digit(s) to get an external
line are dialled (if the feature Least Cost Routing is used in the
system), keep waiting. Once a line becomes free you will receive
a dial tone. If a warning tone is heard, the selected line is marked
Expensive.
1424_EN_LZT103087.doc Rev B2 2009-09-11
©
Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
35
