Note:
This feature needs to be configured in the WinPDM or CPDM by
your system administrator.
When having an ongoing conversation and wanting to establish a phone
conference, do the following:
1. Press More, mark New Call, and press Select.
This will put the first call on hold.
2. Dial the number, and press
.
When the third party has answered, continue with the following
to establish a conference:
3. Press More, mark Conference and press Select.
4. Repeat the procedure to add more conference members.
Note:
If Conference does not show when pressing More, you can also
do the following to establish a conference:
Press R, dial the number to include, and press 3.
9.11
Dialing During a Connected Call
When calling interactive teleservices, for example phone banks, you need
to use Dual Tone Multi Frequency (DTMF) signals. If the phone exchange
is not already programmed to automatically convert entered digits into
DTMF signals, this function needs to be activated during the call.
To dial digits during a connected call, do the following:
1. Press 9
2. Dial the required digits.
Entered digits are transferred as DTMF signals.
Note:
In Finland, press 1 and dial the required digits.
OR
1. Press More, select DTMF and press Select.
2. Dial the required digits.
Entered digits are transferred as DTMF signals.
10
Call Forwarding
There are some different ways of forwarding calls. These are described in
the following sections.
1424_EN_LZT103087.doc Rev B2 2009-09-11
©
Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
53
