System Functions and Features as of I7.9
388
Features
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
8. 6. 3
End-of-selection signal
The input of an external number can be completed with the character #. The PBX
(or network system) interprets this as the end of selection and immediately
switches through.
Detailed Description
Dialling with end-of-selection signal is important in several cases:
•
when dialling an external number in an open numbering plan (
).
•
when the LCR (Least Cost Routing) function is activated: In this case the PBX has
to wait until the user has entered all the digits before it can forward the com-
plete number to the network provider configured. The end-of-selection signal
does not require any additional waiting time (
•
With SIP terminals on a PBX and a PBX connected via an SIP provider to the pub-
lic network. Without end-of-selection the waiting time is 4 seconds.
Fig. 187
Dialling with end-of-selection signal
.ETWORK
.ETWORK
SYSTEM
0"8
HAZAAENA
