System Functions and Features as of I7.9
436
Features
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
Detailed Description
Tab. 276 Preparing to take over an active connection
Application Example
At three football grounds reporters are reporting the matche. Depending on the
state of play, the broadcast director may want to make the connection available to
one of the reporters.
The director can use the preconfigured keys on a terminal to prepare to take over
the connections. All the moderator at the broadcast studio has to do is pick up the
handset on his terminal (to which a hotline has been allocated with *88#) and he is
immediately connected with the football ground. While he is talking, the director
can prepare the connection for the next reporter, and so on.
Prefix Dialling Procedures
Tab. 277 Preparing to take over an active connection: Procedures
System configuration
Tab. 278 Preparing to take over an active connection: System configuration
Interface
Operating sequence / signalling on
the terminal
Scope
B
User B obtains the busy tone once C
has taken the connection to A.
Possible interfaces:
Internal
C
Possible interfaces:
Internal
D
After preparing to take over the call or
taking back the preparations for tak-
ing ver the call, D obtains the acknowl-
edgement tone.
Requirement:
Authorization is enabled in the user configuration.
This authorization can be set separately for call and
data connections.
*/# procedure
Preparations for taking over a call or a data connection from
user B to user C
*87B*C# (call) or with *84B*C# (data connec-
tion)
Clearing the preparations for taking over a call or a data con-
nection from user B to user C
#87 C (call) or with #84C (data connection)
Parameter
Parameter value
Remarks
Call acceptance
Yes
User configuration (user D)
Data transfer
Yes
User configuration (user D)
