System Functions and Features as of I7.9
460
Features
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
Example: Hotline on lift telephone
Switch position 1 (day): 11, switch position 2 (night): 175 and switch position 3
(weekend): 0118.
Note: In this case it is useful to create a special emergency number destination, to
assign three destination numbers to it and to store it under the terminal data. The
emergency number destination configured throughout the system, for which
other destination numbers may be stored, can then be used by "ordinary" users.
Ascotel® IntelliGate® Net:
In an AIN the nodes can be located in different countries, which means it
makes sense to enter in the numbering plan the emergency number nor-
mally used in each country. Depending on the assigned emergency desti-
nation and the switch position of the configured switch group the corre-
sponding destination number is then dialled whenever the emergency
number is dialled.
If the nodes are located in the same country but in different regions sepa-
rate emergency number destinations can be defined for alarming the
local emergency services. These destinations must then be assigned
accordingly in the node configuration.
Terminal-related response:
Provided no emergency number destination is configured on the corre-
sponding terminal
– corded and virtual terminals use the emergency number destination
assigned to the node
– DECT terminals use the emergency number destination of the node on
which the handset is currently located
– IP system terminals use the emergency number destination assigned
to the Master.
