System Functions and Features as of I7.9
Features
479
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
– The ISDN time synchronization and NTP service must be activated
simultaneously.
Ascotel® IntelliGate® Net:
In an AIN there are additional configuration parameters for time synchro-
nization between the nodes.
The Master is always in AIN area 1. This area is always assigned the Master
time. Time differences with other nodes can now be configured based on
the Master time.
Example: Master is in Switzerland; satellite is in Finland. The time differ-
ence with UTC is: CH +01:00, FI +02:00.
Entry for the Master:
Time zone shift
: 00:00
Entry for the satellite: Time zone shift: +01:00
If the time is synchronized via an NTP server the parameter
Time differ-
ence with UTC (+/- hh:mm)
must also be configured to +01.00 as the Mas-
ter time differs from UTC by 1 hour.
System configuration
Tab. 334 System time and system date: System configuration
Reference to Other Features
Parameter
Parameter value
Legend / Remarks /
System time
<hh:mm:ss>
Invalid times are not accepted
system date
<dd.mm.yyyy>
Possible data: 01.01.1980...31.12.2999
Automatic changeover to sum-
mer time
Yes
/
No
The time change is synchronized throughout the
European Union and in many other countries
Time difference with UTC (+/-
hh:mm)
Yes
/
No
In an AIN depending on the Master’s location
NTP service
Yes
/
No
NTP Server
<Address or name>
If name is entered, configure DNS settings
ISDN time synchronisation
Yes
/
No
Usually assigned to only one AIN region
Master time
Yes
/
No
Information field. Always in the AIN Region 1 in
which the Master is also located.
Time zone shift
<±hh:mm>
±12 hours in steps of 15 minutes
Features:
•
•
"Time-controlled functions", page 486
•
"Remote controlling features from outside the system", page 483
