Personalizing Your Phone
69
Formulating Functions
This section explains how to activate an individual function, for example call forwarding uncondi-
tional, with the aid of function commands and how to assign it to a key.
n
Function Commands
You can use function commands to define a function to suit your personal requirements. A
function can consist of one or more function commands, function codes, and the phone
number. You can either carry out a function directly or store it under a function key (select
con-
figurable
function).
Tab. 1
The following function commands are available:
Notes:
• The
Handset
and
Hands-free
settings only work when the ringing signal is
activated.
• If you select answer using
Handset
or
Hands-free
, you must also specify the
Priority
, with 1 being the highest priority, and 8 the lowest:
Priority
Setting the priority:
Select the priority you want from 1 to 8 and confirm with the
Ok
Foxkey.
Þ
The setting is stored.
"A"
Seize line with highest priority
"I"
Seize line
"X"
Disconnect
"P"
Pause 1 second before the next operation
"Lxx"
Seize line xx (Line keys)
"N"
Use the phone number entered in call preparation
"."
Control key function (up-circuit system)
"Z"
Activate/deactivate DTMF mode
"R"
Use the phone number last dialled
"Y"
Disconnect and reseize the line.
eud-0830_en.book Page 69 Wednesday, January 24, 2007 2:00 PM