Line Keys and Programmable Keys
41-001383-05 REV03 – 07.2014
65
Park/Pickup Keys
The 9143i phone has a park and pickup call feature that allows you to park a call and pickup a call when required. The IP
phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ servers.
The park/pickup feature performs as follows:
•
When a call comes in and you pickup the handset, you can press the applicable "Park" programmable key to park the
call.
•
After the call is parked, you can press the "Pickup" programmable key, followed by the applicable value to pickup the
call.
Administrators can configure the park and pickup keys for any line using the configuration files or the Aastra Web UI. Users
can make changes to customize the label of the park/pick up keys using the Web UI.
Configuring Park/Pickup Keys
Use the following procedure to configure park/pickup on the 9143i phone.
Aastra Web UI
1.
Click on
Operation->Programmable Keys
.
Programmable Keys
2.
Select a
"Key 1"
through "
Key 7
".
3.
In the “
Type
” field, select
Park
.
Note:
For values to enter in this field, contact your System Administrator.
4.
Select a
"Key 1"
through "
Key 7
".
5.
In the “
Type
” field, select
Pickup.
6.
Click
Save Settings
.
7.
Click on
Reset
, then click
Restart
to restart the IP phone and apply the changes.
