Line Keys and Programmable Keys
41-001383-05 REV03 – 07.2014
79
Using the Paging Key
The following procedure describes the use of the Paging key on the IP Phone. The procedure assumes you have already
configured the Paging key using the Aastra Web UI.
IP Phone UI
Notes:
1.
Recipient of a Paging call can set a global “Do Not Disturb” (DND) to ignore any incoming pages.
2.
For incoming Paging, the phone uses the Intercom configuration settings. The incoming Page is dependant on the
“Allow Barge-In” parameter setting and the “Idling/On Call” state.
1.
On the IP Phone, press the programmable key you configured for Paging.
The phone opens a multicast RTP session and an outgoing OR incoming phone screen displays as follows:
2.
Press the
Drop
key to end the multicast RTP session and return to the idle screen.
Note:
If you enable global DND on the phone, the incoming multicast RTP session is dropped.
Paging 00:01
= Drop