Line Keys and Programmable Keys
72
41-001383-05 REV03 – 07.2014
Speeddial/Conf
The 9143i allows you to configure a programmable key to be used as a speed dial conference key (
Speeddial/Conf
key)
while remaining in the current call. This key allows a user on a call to conference another party at a pre-defined number
while remaining in the call.
For example, while on an active call, a user can use the Speeddial/Conf key to dial a recording service and have the result-
ing conference recorded.
If you configure a programmable key as a
Speeddial/Conf
key and you press this key while on an active call, the focused
line changes to the dialing line. A
Cancel
softkey displays on the phone allowing you to abort the conference speed dial
if required. The message "
Ringing
..." displays below the number when the far end is ringing. The message "
Conf. Unavail-
able
" briefly displays when a conference is already in progress. The active call is not put on hold when the speed dial
number is dialed.
Configuring a Speeddial/Conf Key
Note:
If currently in a conference, the Speeddial/Conf key is disabled on the active call.
Note:
This feature is not compatible with centralized conferencing.
Aastra Web UI
1.
Click on
Operation->Programmable Keys.
Programmable Keys
2.
Select a
"Key 1"
through "
Key 7
".
3.
In the "
Type
" field, select
Speeddial/Conf
.
4.
In the “
Value
” field, enter the speed dial extension or the extension to add to the conference (for example,
“
5551212
”).
5.
In the “
Line
” field, select the line for which you want to use the key functionality.
6.
Click
Save Settings
.
