Page
65
01/2007
AMT/PTD/PBX/0062/1/2EN
A similar popup window appears when configuring an existing PP by pressing the tool icon .
The only difference lies in the delete subscription checkbox. If this option is selected, the PP will
be deleted.
A PP can be deleted by pressing the trash can icon . A popup window opens and asks for
confirmation.
After a PP is added to the OMM, the PP must be registered. The registration must be authorised
by the OMM MMI. This is done by pressing the “Register” button.
The OMM will allow the registration of configured PPs within the next hour (see the procedure for
registering from a PP in the section corresponding to each of them).
During the subscription process the system-wide PARK and the Authentication Code either
configured for the PP or for the system must be entered in the PP form fields. The PARK is
displayed on the PP configuration page in the top right corner.
If you wish to search for a specific PP, use the search function. Click the
“Search” button
to open
the following window:
Enter the handset number or IPEI. At least one parameter must be defined.
