DECT over IP
®
148
DECT over IP/OpenMobility Manager: WLAN Profiles
Use the following settings for standard operations.
General Settings
•
Select the desired
WLAN Profile
and activate the
Profile Active
option.
•
Enter a
SSID
(Service Set Identifier, wireless network identification) to identify a
network. This network identification is transmitted at regular intervals, making it
easier to find the networks you’re looking for, using the “View available wireless
networks” function in Windows XP, for example.
•
For standard operation you should leave the following settings at their default
values:
VLAN Tag
at 0 (Off ),
Beacon Period
at 100 ms,
DTIM Period
at 5,
RTS
Threshold
at 2347 (Off ),
Fragmentation Threshold
at 2346 (Off ),
Maximum
Bitrate
at 54 Mbit/s,
802.11b/g Mode
at “Mixed” and
Interference Avoidance
on
“Off”.
Tip:
If you are using only modern WLAN cards with 802.11g, you can
further speed up data transfer by configuring the setting
802.11b/g Mode
to “802.11g only”.
•
You can prevent the transmission of wireless network identification (SSID) with the
Hidden SSID Mode
setting. This will however make network identification dif-
ficult and does not generally increase data security, so it is preferable to leave this
on the default setting of “Off”.
Summary of Contents for OpenCom 100 series
