9
Installing on the wall
1. Insert the module
Remove the clip from the connector.
Slide the module all the way into the
base from the right-hand side.
2. Connect the handset cord
Turn the telephone over. Plug one end
of the handset cord into the jack
marked with
on the bottom of the
telephone. Then, route the handset
cord down through the channel below.
3. Connect the line cord
Plug one end of the short (8 in.) line
cord into the jack next to the handset
jack on the bottom of the telephone,
marked with
1
.
Summary of Contents for PowerTouch 350
Page 1: ...PowerTouch 350 User Guide...