22
7 6 Climbing - downstairs
i
NOTE - Observe the safety instructions in Chapter 7!
DANGER - As soon as the climbers assume the load, you feel tension in the handles.
Hold the escalino lower briefl y to counteract this tension!
Set in neutral position.
» Climbers have to be retract-
ed entirely.
Tilt the escalino and keep it
balanced.
Roll escalino forward until
the safety brakes grip.
Press UP/DOWN switch
direction DOWN.
» If the single step mode is
activated, press and hold
the UP/DOWN switch
until escalino stops
independently.
escalino descends.
Roll escalino forward until the
safety brakes grip.
Repeat process from
Figure 4
Climbing downstairs - spiral staircases
To climb spiral staircases, follow the same steps referred to
above in Chapter 7.6.
Please note:
The escalino must be repeatedly aligned with the
spiral staircase during the climbing process, so that both wheels
are always in line with the edge of the step to be climbed next.
Manufacturer’s recommendation:
Activate single step mode.
DANGER!
Compare the conditions of
the spiral staircases to the
technical data in Chapter 4.4!
Never use the escalino on
stairs that are not suitable
pursuant to the technical data.
Non-observance can lead to
falling down the stairs!